Description
The SS4412 Polished Stainless Steel Heated Towel Rail is an affordable luxury for every bathroom. This 600×800 7-bar square ladder rail features a premium polished stainless steel finish that creates a contemporary design statement. Operating safely at 12-volt with a supplied transformer, it rapidly heats to 45–55°C and costs as little as $1 per week to run—backed by an industry-leading 10-year warranty.
Specifications
Product Code
SS4412
Output
90W
Voltage
12V
Number of Bars
7
IP Rating
IP55
Warranty
10 Years
Lead Length
1.5m
Finish
Polished S/Steel
Dimensions
600×800×120mm
Key Features & Benefits
10-Year Warranty
Industry-leading 10-year manufacturer warranty ensures long-term durability and reliability.
Safe 12V Operation
Low-voltage 12V design with supplied transformer allows installation close to wet areas. Same heat output as 240V rails of equivalent wattage.
Polished Stainless Steel Finish
Premium polished finish creates a contemporary design statement and works with any modern bathroom decor.
Energy Efficient
Rapid heat-up to 45–55°C and costs as little as $1 per week to operate with a timer.
Safe, Efficient & Flexible
- Hardwired operation with flexible wiring positions—left or right side, top or bottom
- IP55 rated for bathroom environments
- Can be wired to standard on/off switch or programmable timer for cost control
- Multiple rails can be wired to a single timer (respecting load ratings)
- Transformer can be installed up to 2 metres away in ceiling or wall cavity
- Mounting points: 600mm vertical, 570mm horizontal spacing
- Square ladder design adds visual appeal and towel holding capacity
Frequently Asked Questions
How do I control my heated towel rail?
Thermorails are safe to run continuously but most prefer control. Wire to a standard switch or programmable timer to set your schedule and save energy.
Can I wire multiple rails to one timer?
Yes, you can connect multiple rails to a single timer. All rails wired to one timer operate together. Remember: do not exceed the timer’s load rating (typically 1–16 amps), and all 12V units must be wired through their transformers before connecting to the timer.
Do 12V rails get as warm as 240V rails?
Yes. Heat output is determined by wattage, not voltage. A 12V rail with 90W outputs the same heat as a 240V rail rated 90W.
Are 12V rails more efficient than 240V?
No. Both use the same electricity for equivalent wattage. A 12V 90W rail uses the same energy as a 240V 90W rail.
Where should the transformer be installed?
Install the transformer in the ceiling or wall cavity no more than 2 metres from the rail. If in the wall cavity, it must be behind a switch plate for access and requires proper ventilation.
Can I use a timer with my 12V rail?
Yes. Wire the 12V rail into the transformer’s 12V side, then wire the transformer’s 240V side into the timer. The timer switches the transformer, effectively turning the rail on/off as programmed.
